News

MoFi MasterDeck turntable

MoFi MasterDeck is available for order now.

written by / 2023-12-25 - 8:00 am
MoFi MasterDeck turntable

We’d almost forgotten about this one! MoFi told us about MasterDeck a year and a half ago, and not much has happened since then. But now the turntable is finally finished and ready to order.

The MoFi MasterDeck is the flagship of the series, which has so far consisted of three models, but the recipe is the same for all four.

It is well above the UltraDeck in price, and in the US, where it is built in small quantities, the price is USD 6,000 before VAT – or tax, as they say over there.

The turntable, available in black and walnut, was developed by Spiral Groove legend Allen Perkins and features belt drive, a 10-inch hybrid tonearm with Cardas internal cables, 33/33, 45 and 75 rpm speeds.

 

0000_MoFi_MasterDeck_Turntable_Detail_01_Controls.png 0005_MoFi_MasterDeck_Turntable_Detail_03_Badge.png 0004_MoFi_MasterDeck_Turntable_Detail_04_Tonearm.png 0001_MoFi_MasterDeck_Turntable_Detail_02_SpeedWindow.png
<
>
Photo: MoFi

An aluminium and Delrin platter rests on a Spiral Groove bearing and is driven by an orange silicone strap. The tonearm has a removable headshell and you can adjust the horizontal angle (azimuth), tracking angle (VTA) and overhang. The arm can handle a pickup weight from 5 to 14 grams.

The turntable’s 19.5 kg weight rests on four Harmonic Resolution Systems (HRS) damping feet.

Photo: MoFi

MasterDeck is available to order now on the MoFi Electronics website, but it is not yet known when it will be available in stores here.

MoFi Electronics MasterDeck:

  • Belt drive with Spiral Groove bearing
  • 33/33, 45 and 75 rpm speeds
  • Adjustable 10-inch hybrid tonearm
  • Aluminium and Delrin platter
  • Display for speed indication/adjustment
  • Cardas Audio internal cabling
  • Wood plinth in black ash or walnut
  • Mute feet from HRS
  • Dampened top plate in black anodised aluminium
  • WxHxD: 50.8 x 35.6 x 20.3 cm
  • Weight: 19.5 kg
Photo: MoFi

Leave a Reply

Your email address will not be published. Required fields are marked *

Factory visit: Bang & Olufsen surprises

Yamaha products get Roon approval

Amplifiers from HiFiMAN

Insane amp from Linn

No holds barred, Goldmund

The most insane amplifier we have ever seen

Scroll to Top