News

Pro-Ject Perspective Final Edition turntable

Get your name on one of the last special edition Pro-Ject transparent turntables.

written by / 2023-11-28 - 8:00 am
Pro-Ject Perspective Final Edition turntable

Apart from the Michell Gyrodeck, transparent turntables have been few and far between. Pro-Ject is perhaps the only company that has had some models in transparent acrylic for a long time.

Like this one, the Pro-Ject Perspective, which has been in production for a number of years. But now that has come to an end.

Photo: Pro-Ject

They will now produce 400 units, which they call the Perspective Final Edition.

The turntable is built like a 6.9 Perspective from the 90s. With an acrylic plinth as the base for a belt-driven platter resting on three adjustable feet, with the motor located on the opposite side of the tonearm base.

The arm has a 230 mm carbon fibre arm tube with height adjustment and is fitted with an Ortofon 2M Bronze MM pickup.

The platter is made of aluminium with Pro-Ject’s TPE damping, with the steel axle rotating in a brass bearing.

Foto: Pro-Ject

The turntable also comes with a dust cover and a personalised certificate, and if you wish, you can order a numbered disc with your name on it.

The 400 copies are available to order now and the price is listed at 1,400 euros.

Pro-Ject Perspective Final Edition 9 Pro-Ject Perspective Final Edition7 Pro-Ject Perspective Final Edition6 Pro-Ject Perspective Final Edition5 Pro-Ject Perspective Final Edition 3 Pro-Ject Perspective Final Edition 1
<
>
Photo: Pro-Ject

 

Specifications

  • Speed: 33, 45 (electronic speed change)
  • Type: Belt drive with electronic speed control
  • Platter: 300 mm cast aluminium platter with TPE
  • Platter bearing: High-precision stainless steel shaft with bronze lining
  • Wow & flutter: 33: +/-0.12%; 45: +/-0.11%
  • Speed drift: 33: +/-0.25%; 45: +/-0.23%
  • Signal-to-noise ratio: 70 dB
  • Tonearm: 9″ fully moulded carbon fibre tonearm
  • Effective arm length: 230 mm
  • Overhang: 18 mm
  • Included accessories: 15V DC / 0.8A power supply, dust cover, 7″ single adapter
  • Power consumption: 5W / 0.3W in sleep mode
  • Dimensions: 462 x 175 x 360 mm (WxHxD) 432 x 415 x 455 mm with dust lid open
  • Weight: 8kg net

Check out Brian Eno's colourful turntable

Factory visit: Bang & Olufsen surprises

Yamaha products get Roon approval

Amplifiers from HiFiMAN

Insane amp from Linn

No holds barred, Goldmund

Scroll to Top